I was a little hesitant to post this, thinking that maybe these didn't really look like carnations. But then I was at the dollar store this weekend and saw some fake carnations that looked exactly like mine (only white and green), plus a few of you said that you would like a tute...so here goes!
How to make coffee filter carnations.
I don't have pics for each and every step, but I think I have enough to make it pretty clear.
To start, you are going to make an "O" shape with your fingers and thumb.
Then you are going to lay the coffee filter over the top of your "O" shaped hand and press down in the center. This will push the filter down in between your fingers and thumb.
Keep pushing until you have about 2" sticking up out of your hand. Then twist the part that is against your palm until you get something similar to this. Don't worry about it being perfectly circular, once you have a bunch of these together you won't even notice the shape of any one particular flower.
Now it's time to paint! I mixed a little bit of acrylic paint with water. You want it fairly runny so that the filter will absorb the paint, but not quite as thin as water color paint. Play around with it until you get it the way you want it. If I had to guess, I probably used about 2 parts paint to 1 part water. Dab your paint brush along the edges of the flowers, the paint will soak in a little bit. You don't want it super runny, just enough to soak in about 1/4" to 1/2" down from the edge.
Once these dry (which doesn't take very long) adhere them to your ball of choice. You could use a styrofoam ball, you would probably have to cut off most of the "tail" of the flower and then just hot glue them on. I used a ball that looked like this.
I found this at Dollar Tree. It was in the toys section. I think they were calling it a baseball practice ball. I would call it a wiffle ball, though. I thought it was perfect! I stuck the "tails" of the flowers into the holes (one per hole). If you are concerned about the flowers popping out, you could run a line of hot glue around the holes before putting the flowers in. Most of the flowers seemed secure enough to me to not even need gluing. Since I planning on putting my carnation balls into pots, I only covered half of each ball, which took about a dozen flowers.
Here it is all nice and finished.
If there is any part of this that is unclear please let me know! I'm still a bit of a novice at writing tutorials. If you make this, I would LOVE to see it! Either put a link in the comments on this post or send me a pic in an email (at the top of the blog click on Contact Me).
Posts
